Epoxy Floors in Murray, UT
Garage and basement floor coatings for Murray homes — 1950s through 1970s ramblers, older slabs, repair-and-coat specialists. Polyaspartic system, 15-year warranty.
Murray, Utah sits at the geographic center of the Salt Lake Valley, with the 84107, 84117, and 84123 zip codes covering established neighborhoods along State Street, Vine Street, and east into the Cottonwood-adjacent areas. SLC Epoxy Floor Pros has coated garage and basement floors throughout Murray, where the housing stock is primarily 1950s-1970s ramblers with single and double garages. These older slabs are where our repair-and-coat work shines — we grind, repair, and coat in one mobilization rather than telling you to replace the slab. Locally owned, same-week estimates.
Why Murray Garages Need a Real Coating (Often With Repair)
Murray’s housing stock is older than most of the Salt Lake Valley. A typical Murray garage slab is 50 to 70 years old and has taken five decades of road salt, freeze-thaw cycles, hot tires on old paint, and occasional dropped tools. The damage is real: surface scaling, spider-web cracking at slab joints, pitting from years without protection, and sometimes broken corners at the garage door opening. A coating alone won’t fix any of that — it’ll just telegraph the damage through.
What works on Murray slabs is repair-and-coat: polyurea crack fill, rapid-set patch on divots, sometimes a self-leveling overlay on the worst sections, then the standard coating system on top. The result is a floor that looks like new construction with a designer finish. Replacement would cost three or four times as much and is rarely necessary for structurally sound (but cosmetically beat-up) Murray slabs.
What We Typically Find in Murray Garages
- Severe surface scaling from decades of road salt — nearly universal on Murray garages older than 40 years. The slab is fine; the surface needs grinding and resurfacing before coating.
- Cracks at the garage door opening — common on older slabs from years of edge stress. Polyurea fill, ground flush.
- Old paint or sealer in patches — previous homeowners often painted partial floors. We grind it all off.
- Single-car or partial-garage layouts — some 1950s Murray ramblers have unusual garage geometries (one-and-a-half car, attached carport conversions). We coat whatever’s there.
Our Process for Murray Homes
Free on-site estimate
We come to your Murray address, photograph the slab damage, measure, test moisture, write itemized quote.
Diamond grind + repair
This is the longest step on Murray jobs — older slabs need more substrate work. We do it right the first time.
Primer + basecoat + flake
Vapor-block primer where needed, 100%-solids epoxy basecoat, full broadcast flake.
Polyaspartic topcoat
UV-stable, chemical-resistant top layer.
Walk-through + warranty
Written walk-through, 30-day and 12-month follow-ups. The 12-month follow-up matters more on Murray repair-and-coat jobs because any hidden slab movement shows up by then.
Locally Owned, Working in Murray
We’re a Salt Lake Valley business, and Murray has been part of our service area since day one. We’ve coated floors in 1950s ranches on Vine Street, 1960s split-levels east of State, and the occasional 1970s rambler in the older Cottonwood-adjacent neighborhoods. We know what Murray slabs look like, what they need, and how to coat them properly. The crew that quotes is the crew that installs — no subbing, no out-of-state franchise installers.
Our Services in Murray
Concrete Repair + Coating
The most common Murray service — older slab gets repaired and coated in one mobilization.
Garage Floor Epoxy Coating
Standard coating for slabs that don’t need extensive repair.
Polyaspartic Floor Coating
Same-day-cure system.
Basement Floor Epoxy
For Murray finished basements with seasonal moisture.
Frequently Asked Questions
My Murray garage slab is 60 years old — should I just replace it?
Usually no. Most older Murray slabs are structurally sound; the damage is cosmetic and at the surface. Repair-and-coat costs a fraction of replacement and produces a floor that functions like new for 15 to 20 years.
How quickly can you come out to Murray?
Same-week estimates. We’re in Murray every week.
Will the repair work show through the coating?
Sometimes — polyurea crack fills shaved flush may show as very subtle lines under the coating. Larger patches and resurfaced areas typically blend in with the flake broadcast. We point out which repairs will be visible during the estimate.
Can you handle a single-car or unusual garage layout?
Yes — we’ve coated single-car garages, one-and-a-half car layouts, carport conversions, and detached garages in Murray. The system scales to whatever the slab is.
How much does a Murray garage coating cost with repair?
Depends on extent of substrate damage. Square footage, repair scope, and finish choice all change the number. Call (385) 600-6216 for a free on-site evaluation with itemized written quote.
What We Typically See in Murray Zip Codes
The 84107 zip covers central Murray along State Street and into the older neighborhoods west of 700 East. Heavy concentration of 1950s and 1960s ramblers with single-car or original-build double garages. Slabs almost always need surface repair.
The 84117 zip covers eastern Murray into the Cottonwood-adjacent areas. Slightly newer housing stock on average — 1960s and 1970s split-levels. Some slabs are in better shape; some have settled cracks along the garage door opening.
The 84123 zip covers southern Murray near Fashion Place. Mix of older and newer construction. We evaluate each slab on its own — the era of the home is a starting hint, not a final spec.
Nearby Areas We Also Serve
Murray Free Estimate
Same-week appointments. No high-pressure sales.